How to install the hydraulic buffer door hinge?

three types of door hinges:

1. The full-cover door completely covers the side panel of the cabinet, and there is a gap between the two so that the door can be safely opened.

2. Half-cover In this case, the two doors share one side panel. There is a minimum total clearance required between them. The coverage distance of each door is correspondingly reduced. We need to adopt a hinged hinge to bend the hinge.

3. Built-in In this case, the door is located in the cabinet, next to the side panel of the cabinet. It also requires a gap so that the door can be safely opened. Need to adopt a hinge with a very curved hinge we become a big bend;

The installation method is as follows:

1. Install the hinge cup on the door door hinge with 2 screws

2. Install the hinge to the side panel of the cabinet.

3. According to the door hinge and cabinet installation, adjust the door hinge to achieve the cabinet door to cabinet door, and the gap between the cabinet door and cabinet is the most even.

Coverage distance adjustment Door depth direction adjustment

Turn the screw clockwise: the covering distance of the door is reduced (-) Turn the screw clockwise: The distance between the door and the cabinet is reduced (-)

Turning the screw counterclockwise: the covering distance of the door is increased (+) Turning the screw counterclockwise: The distance between the door and the cabinet is increased (+)

4. Through the adjustable height hinge base, you can achieve accurate height adjustment.

5. After adjusting the gap, the screw holes on the door hinge should be fully covered with screws to ensure the service life of the door hinge.